Plasterboard and drywall materials in Paphos.

Standard plasterboard (Type A)

9.5 · 12.5 · 15 mm

General-purpose board for partitions, wall linings and ceilings in dry rooms.

Thin plasterboard 6.5 mm

6.5 mm

Flexible board for curved walls, ceilings and arches.

Moisture-resistant plasterboard (H2)

12.5 mm

Green board with reduced water absorption for bathrooms, kitchens and other humid rooms.

Fire-rated plasterboard (DF)

12.5 · 15 · 18 mm

Glass-fibre reinforced core that holds together in a fire. For fire-rated walls, ceilings, shafts and steel protection.

Moisture- and fire-resistant plasterboard (DFH2)

12.5 · 15 mm

Fire protection and moisture resistance in one board, for fire-rated walls and ceilings in humid areas.

Massivbauplatte (DF / DFH2)

20 mm · DF or DFH2

Thick solid board for shaft walls and fire-rated walls built with fewer layers.

Knauf Diamant (DFH1IR)

12.5 · 15 mm

High-density board with a hard surface. Impact-resistant, fire-rated and moisture-resistant, with better sound insulation and higher load capacity. For schools, hospitals, corridors and busy spaces.

Knauf Ultra Board

15 mm

Fire-rated board with a polymer and glass-fibre reinforced core. High impact resistance and surface hardness, heavy items hang from a simple screw, and it cuts with a knife.

Knauf Silentboard (DFR)

12.5 mm

Heavy acoustic board for walls where sound insulation matters most, such as bedrooms, hotels and studios.

Knauf Fireboard (VK)

12.5 · 15 · 20 mm

Non-combustible, glass-fibre reinforced board for high fire protection of walls, ceilings, shafts and steel.

[GUARD]EX exterior sheathing board

12.5 mm

Sheathing board used as the base layer for external thermal insulation systems (ETICS).

Knauf Safeboard (DF)

Lead-free plasterboard for radiation protection in X-ray rooms and clinics.

GIFAfloor FHB 25 floor panels

25 mm · 600 × 600 mm

Gypsum fibre floor panels for raised and hollow floors.

Vidifloor F 18 floor board

18 mm

Gypsum fibre floor board for dry floor build-ups.

Danotile Hygena ceiling tiles

Vinyl-faced plasterboard tiles with a vapour barrier, for accessible ceilings in kitchens, clinics and other hygienic areas.

Knauf Advanced Board

Board from Knauf's Advanced plasterboard range.

AQUAPANEL Indoor

12.5 mm

Cement board for showers, bathrooms, pool areas and other wet rooms. Water-resistant and ready for tiles.

AQUAPANEL Outdoor

12.5 mm

Cement board for exterior walls, facades and soffits on metal framing, finished with render.

AQUAPANEL ThermoBase

Lightweight AQUAPANEL cement board for exterior applications.

AQUAPANEL SkyLite

Lightweight AQUAPANEL cement board for ceilings, indoors and outdoors.

AQUAPANEL Rooftop

Cement board that reinforces flat roofs built on metal decks.

AQUAPANEL Joint Filler

Grey · 20 kg

Grey filler for the joints between AQUAPANEL cement boards.

CW studs

50 · 75 · 100 · 150 mm wide · 0.5 / 0.6 mm

Vertical studs for partition walls and wall linings.

UW tracks

50 · 75 · 100 · 125 · 150 mm wide · 0.5 / 0.6 mm

Floor and ceiling tracks that hold the CW studs.

C3 corrosion-protected studs

CW 75/50/0.6 · CW 100/50/0.6

Black studs with extra anti-corrosion protection, for exterior walls and humid environments.

CD ceiling profiles

60×27 mm · 0.5 / 0.6 mm

Main and cross profiles for suspended plasterboard ceilings and wall linings.

UD perimeter tracks

28×27 · 0.6 mm · 37×28 · 0.5 mm

Perimeter tracks fixed to the walls to carry the ends of the CD profiles.

AQUAPROFIL UD perimeter track

Perimeter track for AQUAPANEL ceilings in wet and exterior areas.

UA reinforced profiles

2 mm · 50/40

Heavy 2 mm profiles that reinforce door openings and carry heavier loads in walls and ceilings.

Corner beads

Aluminium 23/13 · 25/25 · flexible with PVC edge

Aluminium and flexible corner beads that protect and straighten outside corners.

Galvanised corner bead

31 × 31 × 0.5 mm

Galvanised steel corner bead that protects and straightens outside wall corners.

DALLAS paper corner bead 90°

90°

Paper corner bead for clean 90° corners on plasterboard.

Plastering guide bead

Guide bead for straight, level plaster surfaces on interior walls.

Nonius hangers

Upper part · lower part · closed type for CD 60/27 and UA 50/40 · connector

Rigid, adjustable hangers that suspend CD profiles from the slab at the exact height.

Universal connector

CD 60/27

Connector for joining CD profiles crosswise at right angles.

T connector for CD 60/27

Rotatable

Rotatable T connector for joining CD profiles on one level.

Π connector for UA 50/40 and CD 60/27

Connector for fixing CD profiles to UA profiles.

X connector for CD 60/27

Connector for joining CD 60/27 profiles on the same level.

Longitudinal connector for CD 60/27

Connector for extending CD 60/27 profiles end to end.

Direct hanger Π for CD 60/27

Direct hanger for fixing CD 60/27 ceiling profiles close to the slab.

Anti-vibration direct hanger

CD 60/27

Direct hanger with an acoustic pad that decouples the ceiling from the slab.

Anti-vibration Ω hanger

Adjustable · CD 60/27

Adjustable anti-vibration hanger for CD profiles that acoustically decouples ceiling and wall linings.

Folding Ω hanger

Folding Ω hanger for fixing CD profiles directly to the slab or wall.

Quick hangers for CD 60/27

With or without safety lock

Quick hangers for suspended ceilings on CD 60/27 profiles.

Hangers for curved ceilings

Hangers for curved plasterboard ceilings.

Hanger rod with eye

Threaded hanger rod with an eye, for suspended ceiling systems.

Rod extension butterfly

Extension piece for joining two hanger rods.

Clip connector for column and beam cladding

Clip connector for cladding steel columns and beams with plasterboard.

Self-adhesive insulation hanger

Self-adhesive pin for fixing mineral or rock wool insulation to plasterboard.

Akifix JY drywall screws

3.5 × 25 · 35 · 45 · 55 mm and longer

Black phosphated sharp-point screws for fixing plasterboard to metal profiles. Akifix's original drywall screw, marked JY on the head.

Akifix drill-point drywall screws

3.5 × 25–55 · 4.2 × 70 mm

Black phosphated screws with a drill point, for fixing plasterboard to thicker metal profiles.

Akifix wafer-head Teks screws

3.5 × 9.5 · 3.5 × 13 mm

Self-drilling screws with an ultra-flat head for joining two metal profiles. The head stays flush, so the board sits flat over it.

Akifix collated drywall screws

3.5 × 25 · 35 · 45 · 55 mm

Drywall screws on 50-piece strips for autofeed screwdrivers, for faster fixing on large jobs.

Akifix screws for cement and fibre-cement boards

4.0 × 32 – 4.8 × 130 mm

White galvanised screws with a spoon drill point and countersinking head, for cement, MgO and fibre-cement boards on metal profiles. Salt-spray tested for exterior use.

Knauf TN sharp-point screws

25 mm and longer

Sharp-point drywall screws for fixing plasterboard to standard metal profiles.

XTB 3.9 drill-point screws

38 mm

Drill-point screws for Diamant and Ultra Board.

Load-hanging screw for plasterboard

Up to 25 kg

Screw for hanging shelves and fixtures on plasterboard, up to 25 kg.

XTN 3.9 sharp-point screws

3.9 mm

Special sharp-point screws for Ultra Board and Diamant boards.

Knauf LN sharp-point screws

Sharp-point screws for joining metal profiles to each other.

Knauf LB drill-point screws

Drill-point screws for joining metal profiles to each other.

AQUAPANEL Maxi screws SN

Sharp-point screws with an alkali-resistant coating for fixing AQUAPANEL cement boards to standard metal profiles.

AQUAPANEL Maxi screws SB

Drill-point screws with an alkali-resistant coating for fixing AQUAPANEL cement boards to thicker metal profiles.

Vidin screws for gypsum fibre boards

Sharp-point screws for gypsum fibre boards.

Vidifloor Solo floor screws

Screws for fixing Vidifloor floor boards together.

Metal cavity anchor for plasterboard

6/16

Metal cavity anchor for hanging loads on plasterboard.

Metal expansion anchor

Metal expansion anchor for fixing ceiling hangers to concrete.

Akifix nylon anchors with screw

Yellow nylon anchors with countersunk screws, for fixing UW tracks, CW studs and fixtures to masonry and concrete.

Uniflott

5 kg · 25 kg

High-strength jointing compound. Fills joints on half-rounded tapered edge boards without tape.

Uniflott impregnated

5 kg

Water-repellent version of Uniflott for H2 moisture-resistant boards.

Fugenfüller Leicht

Lightweight gypsum jointing compound for plasterboard.

Fugenfüller moisture-resistant

Jointing compound for moisture-resistant (H2) plasterboard.

Fireboard-Spachtel

Fire-resistant jointing compound for Knauf Fireboard.

Safeboard-Spachtel

Jointing compound for Safeboard radiation-protection boards.

Knauf F2F

Ready-mixed compound for jointing and finishing.

Fill & Finish Light

20 kg

Lightweight, ready-mixed compound for filling joints and finishing surfaces, from Q1 to Q4.

Finitura

Ready-mixed compound for a perfect final finish.

Super Finish

20 kg

Ready-mixed finishing compound for smooth, high-quality wall and ceiling surfaces, up to Q4 finish.

Readyfix Roll & Spray

28 kg

Ready-mixed finish for walls and ceilings, applied by roller or spray.

Knauf self-adhesive fibreglass mesh tape (Gitterstreifen)

90 m roll

Self-adhesive mesh tape that sticks straight onto the board joint, then gets covered with jointing compound. Quick and easy for DIY.

Knauf Kurt paper joint tape

75 m roll

Strong paper tape bedded into jointing compound to reinforce plasterboard joints and internal corners, for crack-free joints.

Knauf paper joint tape

Paper reinforcing tape for plasterboard joints, bedded into the jointing compound.

Alkali-resistant mesh tape for cement boards

Alkali-resistant fibreglass mesh tape for reinforcing the joints of AQUAPANEL cement boards, indoors and outdoors.

Knauf fire-resistant glass-fibre joint tape

25 m roll

Glass-fibre joint tape for fire-rated plasterboard walls and ceilings.

Knauf lead tape

Lead tape for reinforcing joints in radiation-protection drywall, such as X-ray rooms in clinics and dental surgeries.

Knauf FE 60 MAGIC floor perimeter strip

Perimeter expansion strip laid around the edges of a room before pouring a floor screed, so the screed can move without cracking.

FibaTape Classic self-adhesive joint tape

90 m × 48 mm

Saint-Gobain ADFORS self-adhesive fibreglass mesh tape for plasterboard joints. Thin and easy to cover.

FibaTape Mold-X mould-resistant joint tape

90 m × 48 mm

Self-adhesive mesh tape with a mould-resistant treatment, for joints in bathrooms, kitchens and other humid rooms.

FibaTape Cement joint tape

45 m × 48 mm

Self-adhesive mesh tape made for cement and fibre-cement board joints.

Akifix Top Line self-adhesive joint tape

90 m × 48 mm

Good-value self-adhesive fibreglass mesh tape for everyday plasterboard jointing.

Akifix micro-perforated paper joint tape

Micro-perforated paper tape for strong plasterboard joints and internal corners.

Revo access panels

Revo 12.5 · Revo 25 · Diamant insert

Access panels with a Diamant board insert, for reaching pipes and valves behind walls and ceilings.

Ceiling access panel with H2 board

Aluminium-framed ceiling access panel with a moisture-resistant (H2) board insert and safety catches, for bathrooms, kitchens and other humid rooms.

Easyax access panel

All sizes · custom sizes made to order

Access panel with an aluminium frame, for reaching pipes, valves and cables behind ceilings and walls.

Akifix fire-rated access panels

Ceilings EI 15–120 · shafts EI 20–120 · walls EI 90/120

Aluminium and galvanised steel access panels lined with fire-resistant board and heat-expanding seals. Fire-tested to EN 1363-1. Supplied with key, brackets and screws.

Knauf plasterboard cutter

Cutter for clean, straight cuts in plasterboard.

Knauf profile crimper

Crimping tool for joining metal profiles without screws.

Akifix Extra Q plasterboard cutter

Cuts strips up to 60 cm wide · boards 6–15 mm

Chromed steel board cutter that marks and cuts plasterboard strips in one pass. Takes standard 18 mm blades.

Akino Line self-locking cutter

18 mm blade · rubberised ABS handle

Heavy-duty 18 mm utility knife with a steel frame and self-locking blade, for scoring and cutting plasterboard.

Akino Line aluminium cutter with locking wheel

18 mm blade · die-cast aluminium

Die-cast aluminium 18 mm cutter with a stainless steel blade guide and a locking wheel, for precise, steady cuts.

Akifix plasterboard hand saw

16.5 cm blade · replaceable

Pointed hand saw with a rubber handle for cutting holes for sockets, pipes and lights in plasterboard. No pilot hole needed.

Akifix plasterboard edge plane

2 blade angles · ABS body

Light plane with adjustable depth and two blade angles, for bevelling and smoothing cut plasterboard edges before jointing.

Akifix BEST one-hand stud crimper

Best Quality

One-hand crimping tool that joins studs and tracks without screws. Soft-grip handles for all-day use.

Akifix BIG aviation snips

Left cut (red) · right cut (green)

Compound-lever snips with chrome-molybdenum blades and soft-grip handles, for cutting galvanised steel profiles.

Akifix suede tool belt, 12 pockets

6 pockets · 6 nail pockets · 2 hammer loops

Double-reinforced suede tool belt on an adjustable belt, keeping screws, anchors, hammer, tape and pencil to hand.

Akifix panel carrier

Impact-resistant ABS

Hand-held carrier for one person to carry a full plasterboard sheet, balanced and without damaging the edges.

Akifix 2-wheel board trolley

Up to 600 kg · telescopic handles up to 2 m

Site trolley with rubber handles and an 80 × 25 cm base, for moving stacks of plasterboard around the site.

Akifix Hercules board lifter

Ceilings up to 4.0 m · walls up to 4.5 m · 50 kg

Telescopic board lifter with a safety lock and removable wheels. One person can lift and hold a board against the ceiling while screwing it.

DeWalt DCF620P2K 18V XR brushless drywall screwdriver

2 × 5.0 Ah batteries · charger · TSTAK II case

Cordless screwgun made for plasterboard, with an adjustable depth nose so every screw sits at the right depth.

€399.00 incl. VAT

DeWalt DCD778S2T 18V XR combi drill

2 × 1.5 Ah batteries · 65 Nm · 1.2 kg

Compact hammer drill driver with a 1.5–13 mm chuck. A good all-round drill for DIY and fit-out work.

€199.00 incl. VAT

DeWalt DCH133M1 18V XR brushless SDS-plus hammer

1 × 4.0 Ah battery · charger · TSTAK · 2.6 J. Body only (DCH133NT): €209.00

Cordless SDS-plus rotary hammer for drilling concrete and masonry, for example fixing ceiling hangers and anchors.

€299.00 incl. VAT

DeWalt DCK2023M2T 18V XR kit: impact driver + SDS-plus hammer

DCF887 + DCH133 · 2 × 4.0 Ah batteries · charger · TSTAK II

Brushless impact driver and SDS-plus hammer in one kit, sharing the same 18V batteries.

€559.00 incl. VAT

DeWalt DCS356NT 18V XR brushless multi-tool

Body only · TSTAK II case · 1.1 kg

Oscillating multi-tool for cutting openings in fitted plasterboard and trimming profiles, timber and trims.

€239.00 incl. VAT

DeWalt DCS334NT 18V XR jigsaw

Body only · TSTAK case · bevel 0–45°

Cordless jigsaw with a 26 mm stroke and dust extraction, for curved and straight cuts in boards and timber.

€279.00 incl. VAT

DeWalt DCE590N 18V XR GRABO battery lifter

Body only · lifts up to 120 kg horizontal, 60 kg vertical

Battery-powered suction lifter for carrying and placing plasterboard, tiles, stone and glass. Digital pressure display and double-release safety button.

€399.90 incl. VAT

DeWalt DCH263P1 18V XR brushless SDS-plus hammer, 3 J

1 × 5.0 Ah battery · charger · case. Body only (DCH263N): €269.00

Powerful 3 J rotary hammer with low-vibration Perform & Protect, for drilling concrete and fixing anchors and hangers.

€379.00 incl. VAT

DeWalt DCD805NT 18V XR compact hammer drill driver

Body only · TSTAK case · 90 Nm

Compact brushless hammer drill with 15 torque settings, 2 speeds, 3-mode LED and a magnetic bit holder.

€179.00 incl. VAT

DeWalt DCD799NT 18V XR brushless hammer drill driver

Body only · TSTAK case · 74 Nm · 1 kg

Light brushless hammer drill with a 13 mm metal chuck, LED work light and belt hook.

€149.00 incl. VAT

DeWalt DCF887N 18V XR impact driver

Body only · 205 Nm · 3 speeds

Brushless 3-speed impact driver for screws, bolts and anchors.

€110.00 incl. VAT

DeWalt DCK2026P2T kit: hammer drill + angle grinder

DCD805 + DCG405 · 2 × 5.0 Ah · charger · TSTAK II

Brushless hammer drill and angle grinder in one kit, sharing the same 18V batteries.

€559.00 incl. VAT

DeWalt DCS369NT 18V XR brushless reciprocating saw

Body only · TSTAK case · 90 mm cut

One-handed reciprocating saw with quick-change blades, for cutting timber, profiles and pipes.

€179.00 incl. VAT

DeWalt DCS572NT 18V XR brushless circular saw, 184 mm

Body only · TSTAK case · 58 mm cut at 90°

Circular saw with AirLock dust extraction and a precision blade, for OSB, timber and boards.

€319.00 incl. VAT

DeWalt DCL050 18V XR LED hand light

Body only · 250–500 lm · up to 10 h

Pivoting-head LED work light for ceilings and dark corners.

€76.00 incl. VAT

DeWalt DCL077 compact LED floodlight

500 / 1,000 / 2,000 lm · IP54

Compact site floodlight with three brightness settings, protected against dust and water.

€159.00 incl. VAT

DeWalt DCB184 18V XR 5.0 Ah battery

5.0 Ah · 0.6 kg

Fits all DeWalt 18V XR tools, including the body-only tools above.

€89.00 incl. VAT

DeWalt DCB183 18V XR 2.0 Ah battery

2.0 Ah · 0.4 kg

Light 18V XR battery for drills, drivers and lights.

€59.00 incl. VAT

DeWalt DCB1104 12–18V XR charger

4 A · 0.5 kg

Charger for DeWalt 12V and 18V XR Li-ion batteries.

€60.00 incl. VAT

NatuRoll Plus

Roll · Glass mineral wool with ECOSE®

General-purpose mineral wool roll for drywall partitions, suspended ceilings and lofts. Thermal and acoustic insulation.

Ultracoustic

Roll · Glass mineral wool with ECOSE®

Mineral wool roll for sound insulation inside drywall partitions, wall linings and ceilings.

Ultracoustic P

Slabs · Glass mineral wool with ECOSE®

Mineral wool slabs for acoustic insulation in drywall partitions and wall linings.

Unifit 035

Semi-rigid roll · λ 0.035 W/mK

Semi-rigid, reinforced mineral wool roll for walls and pitched roofs. Thermal and acoustic insulation.

TI 312 RA / Earthwool ALU 040

Aluminium-faced roll · λ 0.040 W/mK

Mineral wool roll faced with reinforced aluminium foil, which also acts as a vapour barrier. For roofs and ceilings.

Naturboard 032

Slabs · λ 0.032 W/mK

Mineral wool slabs with the best thermal grade in the range, for interior insulation where space is tight.

Naturboard 035

Slabs · λ 0.035 W/mK

Mineral wool slabs for cavity (double) walls, partitions and roofs.

Naturboard 037

Flexible slabs · λ 0.037 W/mK

Flexible mineral wool slabs that fit snugly between studs in partitions, wall linings and ceilings.

KI Therm 030 P

Slabs · λ 0.030 W/mK

High-performance mineral wool slabs for interior insulation, giving more insulation for the same thickness.

TP 435 B

Slabs with black facing

Mineral wool slabs with a black glass-tissue facing, for open-joint cladding and slatted ceilings where the insulation can be seen.

NaturBoard FIT PLUS

Slabs · Rock mineral wool

Self-supporting rock wool slab for drywall, double masonry walls and ceilings. Thermal, acoustic and fire protection.

NaturBoard TF

Slabs · Rock mineral wool

Reinforced, multi-purpose rock wool insulation slab.

NaturBoard POD EXTRA

Slabs · Rock mineral wool

Reinforced rock wool floor slab, laid under screeds to cut impact noise between floors.

NaturBoard VENTI

Slabs · Rock mineral wool

Thermal insulation slab for ventilated facades and masonry walls.

NaturBoard VENTI PLUS

Slabs · Rock mineral wool

Reinforced, denser rock wool slab for ventilated facades.

NaturBoard VENTACUSTO

Slabs · Rock mineral wool

Thermal insulation slab for ventilated facades.

FKD-N Thermal

Slabs · Rock mineral wool

Rock wool slabs for rendered external wall insulation (ETICS). Non-combustible.

FKD-S Thermal

Slabs · Rock mineral wool

Rock wool slabs for rendered external wall insulation (ETICS). Non-combustible.

AIRwall

Slabs · Rock mineral wool

Rock wool slabs for rendered external wall insulation (ETICS).

SmartRoof Thermal

Slabs · Rock mineral wool

Rock wool insulation slab for flat roofs.

SmartRoof TOP

Slabs · Rock mineral wool

Reinforced rock wool top-layer slab for flat roofs, laid under the waterproofing.

Chimenea S DP10 ALU

Aluminium-faced slabs · Rock mineral wool

Aluminium-faced rock wool slabs for insulating fireplace and chimney surrounds.

SUPAFIL Cavity Wall 034

Blowing wool · λ 0.034 W/mK

Loose mineral wool blown into the cavity of double masonry walls, ideal for insulating existing buildings.

SUPAFIL Loft 045

Blowing wool · λ 0.045 W/mK

Loose mineral wool blown into roofs, lofts and attic floors.

HERAKLITH A2-C

Wood-wool board · A2-s1, d0

Solid wood-wool boards, non-combustible (class A2-s1, d0), for ceilings and walls such as basements and car parks.

TEKTALAN A2-HS

Wood wool + rock wool core

Composite wood-wool board with a rock wool core. Non-combustible thermal insulation for ceilings of basements and car parks.

Tektalan A2 SmartTec

Wood wool + rock wool core

Composite wood-wool board with a rock wool core. Non-combustible.

Heraklith BTW, beige

Wood-wool board

Beige wood-wool board for sound-absorbing ceilings and walls.

Knauf white EPS 037 boards

600 × 1000 mm · ask for thicknesses

White expanded polystyrene boards for external wall insulation. Ask us for thicknesses and grades.

Thermoprosopsis White KAM 700

25 kg

White, ready-mixed, fibre-reinforced cement mortar for the Knauf Thermoprosopsis external insulation system. Gives a fine, smooth surface.

Thermoprosopsis Multi Fine

25 kg · grey

Grey, fine-grained, fibre-reinforced cement mortar for bonding insulation boards and as the reinforced base coat in external wall insulation. Made in Cyprus.

Akifix 160MEDIUM fibreglass mesh

160 g/m² · roll 50 × 1 m

Fibreglass mesh for reinforcing the base coat in external wall insulation and renders.

Akifix PVC corner beads with mesh

22 × 22 mm · 2.5 m · mesh 12 × 8 or 15 × 10 cm

Perforated PVC corner beads with fibreglass mesh attached, for straight, strong outside corners on insulated facades.

Akifix PVC drip profile with mesh

2.5 m

PVC profile with fibreglass mesh and a drip edge for horizontal edges such as window heads and balcony undersides. Sends rainwater away from the wall.

Akifix aluminium starter profiles

For boards 30–160 mm · 2.5 m

Aluminium profiles fixed at the base of the wall to support and line up the first row of insulation boards.

Thermoprosopsis insulation anchor

Knauf anchor for fixing EPS insulation boards in the Thermoprosopsis system.

Akifix EASIER PRO insulation anchors

ø 8 × 80 – 295 mm

Nylon anchors with a steel screw for mechanically fixing insulation boards to the wall. Hammer-in or screw-in, depending on length.

OSB/2 boards

Various thicknesses

Load-bearing boards for use in dry conditions: interior floors, wall linings, shelving and packaging.

OSB/3 boards

Various thicknesses

Load-bearing boards for humid conditions: floors, roofs, wall sheathing, timber frame and garden sheds.

OSB/4 boards

Various thicknesses

Heavy-duty load-bearing boards for humid conditions, for floors and roofs that carry high loads.